Dryer Repair

A dryer should finish a load in one or two normal cycles. If clothes stay damp, the drum stops turning, or the appliance becomes too hot, something is not working correctly.

Viva Appliance Repair provides dryer repair throughout the Bay Area. We service many common brands and models. Our technician will inspect the appliance, identify the problem, and explain the repair before starting any work.

Common Dryer Problems

Contact us if your dryer:

• Runs but does not produce heat.
• Does not start.
• Stops before the cycle is finished.
• Takes too long to dry clothes.
• Leaves clothes damp after several cycles.
• Makes squeaking, rattling, or thumping sounds.
• Turns on, but the drum does not spin.
• Becomes unusually hot.
• Has a burning smell.
• Shuts off after a few minutes.
• Displays an error code.
• Does not respond to the control panel.

A dryer that runs without heat may have a problem with the heating element, thermostat, thermal fuse, ignition system, or power supply. The exact cause depends on whether the appliance is electric or gas.

If the drum does not turn, the drive belt may be broken or loose. The motor, rollers, or pulley system may also need attention.

Do not continue using a dryer that smells like burning or becomes extremely hot.

Long drying times are often linked to poor airflow. A clogged lint filter, blocked vent, or restricted exhaust line prevents heat and moisture from leaving the dryer.

The machine then has to run longer. Clothes remain damp, energy use increases, and the appliance may overheat.

Clean the lint filter after every load. If drying still takes too long, the vent system or internal airflow should be checked.

Loud noises can come from worn rollers, bearings, belts, or other moving parts. Small objects may also become trapped near the drum.

A dryer that shuts off early may be overheating. It may also have a problem with the motor, temperature controls, or airflow.

If the appliance does not start, check that the door is fully closed and the dryer has power. A faulty door switch, start button, control, or internal safety part may prevent operation.

What We Check

We begin by asking what happens during the cycle. Does the drum turn? Is there any heat? Does the dryer stop after a few minutes?

Depending on the symptoms, the technician may inspect:

• The heating system.
• Thermal fuses and thermostats.
• The drum belt, rollers, and pulley.
• The motor and door switch.
• The lint filter and airflow path.
• Electrical or gas connections.
• The control panel and error codes.

Once the problem is found, we explain what caused it and what needs to be repaired. You will know the repair cost before the work begins.

When scheduling service, provide the dryer brand and model number when possible. The model label is usually located inside the door opening or on the back of the appliance.

Do not remove gas lines or electrical panels yourself. Dryers use high voltage or gas connections, and incorrect work can create a serious safety risk.

Local Dryer Repair

Viva Appliance Repair provides dryer repair for houses, apartments, condos, and rental properties throughout the Bay Area.

Our service area includes:

Palo Alto, Sunnyvale, Santa Clara, San Jose, Cupertino, Los Altos, Los Gatos, Redwood City, Menlo Park, San Mateo, Fremont, Milpitas, San Francisco, and Daly City, California.

When contacting us, describe the problem briefly. Mention whether the dryer is not heating, making noise, overheating, or taking too long to dry clothes.

A faulty dryer does not always need to be replaced. A proper diagnosis can show whether a practical repair will restore normal and safe operation.

Contact Viva Appliance Repair to schedule dryer repair in your area.